Page History
Excerpt |
---|
Instead of using drag-and-drop function to move the issues within a structure, you can use the cut/paste feature. This is especially convenient, if you have a large structure and, for example, need to move some issues from the top of the structure to the bottom or the other way around. |
Cut
First add the desired issues to the clipboard:
- Select the issues you want to cut. Either select a single issue, or use multiple selection.
- Click the Cut button on the structure toolbar (or press Ctrl+x or Command+x).
- Selected issues will be put into the clipboard and marked with a small scissors icon .
- The Clipboard icon with the number of the cut issues will appear in the top right corner of the structure widget.
Info |
---|
Note, that the cut issues are not removed from the structure. |
Info |
---|
If the cut issue contains sub-issues, these sub-issues are cut with their parent. |
Paste
After you have cut the issues, you can now paste them back to any place in the structure:
- If want to see the Issue Clipboard panel, you can open it clicking the Clipboard icon . However, this is not necessary to use the Cut/Paste function.
- In the structure select the issue after which the issues from the clipboard should be placed.
- Either click Paste button on the toolbar (or press Ctrl+v or Command+v) to place the issues after the selected issue at the same indentation level, or press Ctrl+Shift+v (or Command+Shift+v on Mac) to place the issues under the selected issue (as the children).
Info |
---|
If the cut issue contains sub-issues, these sub-issues are pasted with their parent. |
Info |
---|
After Paste the clipboard is cleared. |
Tip |
---|
The Paste operation can be undone. |